DIY TriGorilla Motherboard for 3D Printer

Price:
$27.71

Free Shipping


Classification
Product Type Modules
Electronic Components
Input Voltage 10-30 -volt
PCB Size 125*82 mm
Microprocessors
Microprocessor Model ATMEGA256016AU
Package
Package Type OEM
Package Contents 1*TriGorilla Motherboard, 1*USB Cable
Dimensions us | metric
Depth 82 mm
Height 30 mm
Width 125 mm
Product Weight 135 g
FastTech
SKU 9694670
DATE LISTED 4/17/2019
Details:
  • Main Control Chip: ATMEGA256016AU
  • Input Power: 10V ~ 30V
  • Standby Current: 35mA±5mA
  • Stepper Motor Drivers: 5 channel Max
  • Hot bed Output Control: 1 channel
  • Heated output control: 2 channel
  • Under-current output control: 3 channel
  • Simple
    to install: Integrated with the mighty function of the Mega2560+ramps
    1.4 kit, Great reduce the wiring problem, more convenient connection,
    and more stable.
  • Convenient to use: TriGorilla motherboard
    support LCD2004 and LCD12864 without using adapter, and there are two
    choices for main board power supply, you can choose DC power supply
    connection or directly from the terminal, it is convenient to use.
    TriGorilla use CP2102 chip as a serial port communication, communication
    not only stable, but also avoid the repeated to install the
    driver(There will be increased “COM” port when replacing the traditional
    2560 board, so while those people who need to batch purchasing test,
    the “COM” increases to a certain value will lead to can’t upload the
    firmware problem.)
  • Excellent compatibility: Firmware can use the
    same configuration as ramps1.4, the marlin firmware which runs in
    Mega2560+ramps 1.4 kits can directly running in TriGorilla board.
  • Voltage
    input at super wide range, short-circuit protection: TriGorilla adopts
    DC – DC step-down scheme design and Recoverable fuse for short-circuit
    protection, improving the MEGA2560 board serious heating problem,
    Allowing any power supply from 10V-30V.
  • Support up to 5 motor
    drivers, support A4988/ DRV8825 /TMC2100 driver: Motor drive circuit
    doesn't integration on the circuit board. You can change any stepper
    motor driver you need, easier to operate. (Support A4988/ DRV8825
    /TMC2100 driver)
  • Rich expansion port: TriGorilla had reserved
    SERVO, UART, IIC expansion, so you can use it realize automatic
    leveling, control touch screen smart controller, control wireless module
    and the detection of break, etc
  • Wide applicability: Widely used in 3D printers, e.g. Kossel, Prusa i3, corexy, etc
Questions?

We'd love to help! Contact Customer Advocates.

This item is covered by FastTech's Standard Return Policy:



100% Satisfaction Guaranteed

Return for refund within: 45 days (details)
Return for replacement within: 6 months (details)

No restocking fee. Shipping charges may apply if returns are not results of FastTech's error.

Available models and parts:

Mega2560/RAMPS1.4 compatible / supports A4988/DRV8825/TMC2100 driver / 5CH stepper motor driver

$27.71

WORLDWIDE FREE SHIPPING

Mega2560/RAMPS1.4 compatible / supports A4988/DRV8825/TMC2100 driver / 5CH stepper motor driver

$31.34

WORLDWIDE FREE SHIPPING

head(“storefront.15.min.js”, function () {
ProductGrid.init();
});


All major credit cards accepted. 100% Satisfaction Guaranteed.

Norton Secured, VeriSign Authenticated - Click to Verify